Light pinpoints stress and strain – A Brillouin’t idea from OZ Optics
Remote Pipeline, Perimeter, and Structural Monitoring…
Foresight™, from OZ Optics, is a sophisticated Distributed Strain and Temperature Sensor (DSTS) based on Brillouin scattering in an optical fibre. It can measure subtle changes in both temperature and strain along the length of the fibre over time, or the rapid location detection of a major disturbance within a second.
By wrapping or embedding a fibre inside a structure, such as an oil pipeline or dam, detection of the structure being strained or heated/cooled is possible, allowing for pre-emptive maintenance. Such monitoring capability is invaluable in critical structures where cracks and failure could involve loss of life or other unprecedented costs.
Foresight™ can also detect and report larger signals within one second with only a slight loss of accuracy. This sort of response speed is ideal for security applications or strains caused by earthquakes where an immediate measurement and reaction may be required.
For more details about this system, please contact us.
Non-contact Visible Fault Location in fibre added to OZ Optics range
OZ Optics has expanded its range of Visible Fibre Optic Fault Locators with the addition of a benchtop non-contact tester, the ideal solution for inspecting devices with no connectors on the fibre ends. Visible Fibre Optic Fault Locators launch either 520 or 635 nm laser diode light into a fibre to enable discovery of breaks or sharp bends, which are revealed by the resulting scattered light emerging from the sides of the cable.
Fault locators are now available in four models: two benchtop and two portable…
- Benchtop Non-Contact, for CW and pulsed operation
- Benchtop CW High Power only
- Portable pen – CW only
- ‘Pocket size’ offering CW or pulsed output
Pulse modulation aids in locating faults under high ambient light conditions and improves battery life. 2 Hz modulation is easy to detect with the naked eye, while 270 Hz and 2 kHz pulse modulation modes are used for fibre identification by detectors.
Light pinpoints stress and strain – A Brillouin’t idea from OZ Optics
Remote Pipeline, Perimeter, and Structural Monitoring…
Foresight™, from OZ Optics, is a sophisticated Distributed Strain and Temperature Sensor (DSTS) based on Brillouin scattering in an optical fibre. It can measure subtle changes in both temperature and strain along the length of the fibre over time, or the rapid location detection of a major disturbance within a second.
By wrapping or embedding a fibre inside a structure, such as an oil pipeline or dam, detection of the structure being strained or heated/cooled is possible, allowing for pre-emptive maintenance. Such monitoring capability is invaluable in critical structures where cracks and failure could involve loss of life or other unprecedented costs.
Foresight™ can also detect and report larger signals within one second with only a slight loss of accuracy. This sort of response speed is ideal for security applications or strains caused by earthquakes where an immediate measurement and reaction may be required.
For more details about this system, download the datasheet, or contact us.
Elliot Scientific 